How to modify kernel DTB file

Question

Summary

I am currently compiling the Linux kernel (kernel, modules and DTB) with some custom drivers for a custom board. Occasionally I\'ll compile the

Answer 1

Just want to update this with 2 years more experience on the subject.

The DTS files in the Linux repository are a mixture of DTS and C preprocessor directives (#include, #define, etc.). So when the original DTB is compiled, the preprocessor links to the referenced files to create a pure DTS file. dtc converts the single DTS file into a DTB file.

So if you want to modify a kernel DTS file and compile it, then you have two options:

1. Just run make dtbs which automatically handles all of this
2. Manually run the preprocessor (cpp -nostdinc -I <include dir> -undef -x assembler-with-cpp ...) and then compile the output with dtc.

Answer 2

Why don't you generate new dtb?

DTB(Device tree blob/binary), is hardware database which represents the hardware components of the board.

U-boot pass the board information struct to the kernel, that is derived from the header file in U-Boot.

DTB is compiled by the special compiler that produces the binary in the proper form for U-Boot and Linux to understand.

---

DTC (Device Tree Compiler) it translates device tree file to the machine-readable binary that U-Boot and Linux kernel can understand.

The straightforward way to use DTC.

$ dtc -O dtb -o arm_board.dtb -b 0 arm_board.dts

to get the device tree in text from the dtb.

dtc -I dtb -O dts arm_board.dtb

board.dts is binary created by the above command. -O specifies the output format. -o flag is output file. -b 0 specifies physical boot CPU.

Then do

$ make ARCH=arm arm_board.dtb

---

Another approach might be just use make dtbs this will call dtc. arch/arm/boot/dts/Makefile lists which DTBs should be generated at build time This another way to compile it. make will put that in this location of kernel tree /arch/arm/boot/dts

Have a look at this Device Tree for Dummies