OpenCV - Removal of noise in image

Question

I have an image here with a table.. In the column on the right the background is filled with noise

How to detect the areas with noise? I only want to apply some kind of

Answer 1

As I know the median filter is the best solution to reduce noise. I would recommend to use median filter with 3x3 window. See function cv::medianBlur().

But be careful when use any noise filtration simultaneously with OCR. Its can lead to decreasing of recognition accuracy.

Also I would recommend to try using pair of functions (cv::erode() and cv::dilate()). But I'm not shure that it will best solution then cv::medianBlur() with window 3x3.

Answer 2

I would go with median blur (probably 5*5 kernel).

if you are planning to apply OCR the image. I would advise you to the following:

1. Filter the image using Median Filter.
2. Find contours in the filtered image, you will get only text contours (Call them F).
3. Find contours in the original image (Call them O).
4. isolate all contours in O that have intersection with any contour in F.

Faster solution:

1. Find contours in the original image.
2. Filter them based on size.

Answer 3

If you are very worried of removing pixels that could hurt your OCR detection. Without adding artefacts ea be as pure to the original as possible. Then you should create a blob filter. And delete any blobs that are smaller then n pixels or so.

Not going to write code, but i know this works great as i use this myself, though i dont use openCV (i wrote my own multithreaded blobfilter out of speed reasons). And sorry but i cannot share my code here. Just describing how to do it.

Answer 4

My solution is based on thresholding to get the resulted image in 4 steps.

1. Read image by OpenCV 3.2.0.
2. Apply GaussianBlur() to smooth image especially the region in gray color.
3. Mask the image to change text to white and the rest to black.
4. Invert the masked image to black text in white.

The code is in Python 2.7. It can be changed to C++ easily.

import numpy as np
import cv2
import matplotlib.pyplot as plt
%matplotlib inline 

# read Danish doc image 
img = cv2.imread('./imagesStackoverflow/danish_invoice.png')

# apply GaussianBlur to smooth image
blur = cv2.GaussianBlur(img,(5,3), 1) 

# threshhold gray region to white (255,255, 255) and sets the rest to black(0,0,0)
mask=cv2.inRange(blur,(0,0,0),(150,150,150))

# invert the image to have text black-in-white
res = 255 - mask

plt.figure(1)
plt.subplot(121), plt.imshow(img[:,:,::-1]), plt.title('original') 
plt.subplot(122), plt.imshow(blur, cmap='gray'), plt.title('blurred')
plt.figure(2)
plt.subplot(121), plt.imshow(mask, cmap='gray'), plt.title('masked')
plt.subplot(122), plt.imshow(res, cmap='gray'), plt.title('result')
plt.show()

The following is the plotted images by the code for reference.

Here is the result image at 2197 x 3218 pixels.

Answer 5

I tried some filters/operations in OpenCV and it seems to work pretty well.

Step 1: Dilate the image -

kernel = np.ones((5, 5), np.uint8)
cv2.dilate(img, kernel, iterations = 1)

As you see, the noise is gone but the characters are very light, so I eroded the image.

Step 2: Erode the image -

kernel = np.ones((5, 5), np.uint8)
cv2.erode(img, kernel, iterations = 1)

As you can see, the noise is gone however some characters on the other columns are broken. I would recommend running these operations on the noisy column only. You might want to use HoughLines to find the last column. Then you can extract that column only, run dilation + erosion and replace this with the corresponding column in the original image. Additionally, dilation + erosion is actually an operation called closing. This you could call directly using -

cv2.morphologyEx(img, cv2.MORPH_CLOSE, kernel)

As @Ermlg suggested, medianBlur with a kernel of 3 also works wonderfully.

cv2.medianBlur(img, 3)

Alternative Step

As you can see all these filters work but it is better if you implement these filters only in the part where the noise is. To do that, use the following:

edges = cv2.Canny(img, 50, 150, apertureSize = 3) // img is gray here
lines = cv2.HoughLinesP(edges, 1, np.pi / 180, 100, 1000, 50) // last two arguments are minimum line length and max gap between two lines respectively.
for line in lines: 
    for x1, y1, x2, y2 in line: 
        print x1, y1
// This gives the start coordinates for all the lines. You should take the x value which is between (0.75 * w, w) where w is the width of the entire image. This will give you essentially **(x1, y1) = (1896, 766)**

Then, you can extract this part only like :

extract = img[y1:h, x1:w] // w, h are width and height of the image

Then, implement the filter (median or closing) in this image. After removing the noise, you need to put this filtered image in place of the blurred part in the original image. image[y1:h, x1:w] = median

This is straightforward in C++ :

extract.copyTo(img, new Rect(x1, y1, w - x1, h - y1))

Final Result with alternate method

Hope it helps!

Answer 6

I had already faced the same issue and got the best solution. Convert source image to grayscale image and apply fastNlMeanDenoising function and then apply threshold.

Like this -

fastNlMeansDenoising(gray,dst,3.0,21,7);
threshold(dst,finaldst,150,255,THRESH_BINARY);

ALSO use can adjust threshold accorsing to your background noise image. eg- threshold(dst,finaldst,200,255,THRESH_BINARY);

NOTE - If your column lines got removed...You can take a mask of column lines from source image and can apply to the denoised resulted image using BITWISE operations like AND,OR,XOR.