How do I get an ECDSA public key from just a Bitcoin signature? … SEC1 4.1.6 key recovery for curves over (mod p)-fields

前端未结

关注

 2  1769

陌清茗

Update: Partial solution available on Git

EDIT: A compiled version of this is available at https://github.com/makerofthings

相关标签:

2条回答

灰色年华

2021-02-04 00:23

After referencing BitcoinJ, it appears some of these code samples are missing proper preparation of the message, double-SHA256 hashing, and possible compressed encoding of the recovered public point that is input to the address calculation.

The following code should only need BouncyCastle (probably you'll need recent version from github, not sure). It borrows a few things from BitcoinJ, and does just does enough to get small examples working, see inline comments for message size restrictions.

It only calculates up to the RIPEMD-160 hash, and I used http://gobittest.appspot.com/Address to check the final address that results (unfortunately that website doesn't seem to support entering a compressed encoding for the public key).

    public static void CheckSignedMessage(string message, string sig64)
    {
        byte[] sigBytes = Convert.FromBase64String(sig64);
        byte[] msgBytes = FormatMessageForSigning(message);

        int first = (sigBytes[0] - 27);
        bool comp = (first & 4) != 0;
        int rec = first & 3;

        BigInteger[] sig = ParseSig(sigBytes, 1);
        byte[] msgHash = DigestUtilities.CalculateDigest("SHA-256", DigestUtilities.CalculateDigest("SHA-256", msgBytes));

        ECPoint Q = Recover(msgHash, sig, rec, true);

        byte[] qEnc = Q.GetEncoded(comp);
        Console.WriteLine("Q: " + Hex.ToHexString(qEnc));

        byte[] qHash = DigestUtilities.CalculateDigest("RIPEMD-160", DigestUtilities.CalculateDigest("SHA-256", qEnc));
        Console.WriteLine("RIPEMD-160(SHA-256(Q)): " + Hex.ToHexString(qHash));

        Console.WriteLine("Signature verified correctly: " + VerifySignature(Q, msgHash, sig));
    }

    public static BigInteger[] ParseSig(byte[] sigBytes, int sigOff)
    {
        BigInteger r = new BigInteger(1, sigBytes, sigOff, 32);
        BigInteger s = new BigInteger(1, sigBytes, sigOff + 32, 32);
        return new BigInteger[] { r, s };
    }

    public static ECPoint Recover(byte[] hash, BigInteger[] sig, int recid, bool check)
    {
        X9ECParameters x9 = SecNamedCurves.GetByName("secp256k1");

        BigInteger r = sig[0], s = sig[1];

        FpCurve curve = x9.Curve as FpCurve;
        BigInteger order = x9.N;

        BigInteger x = r;
        if ((recid & 2) != 0)
        {
            x = x.Add(order);
        }

        if (x.CompareTo(curve.Q) >= 0) throw new Exception("X too large");

        byte[] xEnc = X9IntegerConverter.IntegerToBytes(x, X9IntegerConverter.GetByteLength(curve));

        byte[] compEncoding = new byte[xEnc.Length + 1];
        compEncoding[0] = (byte)(0x02 + (recid & 1));
        xEnc.CopyTo(compEncoding, 1);
        ECPoint R = x9.Curve.DecodePoint(compEncoding);

        if (check)
        {
            //EC_POINT_mul(group, O, NULL, R, order, ctx))
            ECPoint O = R.Multiply(order);
            if (!O.IsInfinity) throw new Exception("Check failed");
        }

        BigInteger e = CalculateE(order, hash);

        BigInteger rInv = r.ModInverse(order);
        BigInteger srInv = s.Multiply(rInv).Mod(order);
        BigInteger erInv = e.Multiply(rInv).Mod(order);

        return ECAlgorithms.SumOfTwoMultiplies(R, srInv, x9.G.Negate(), erInv);
    }

    public static bool VerifySignature(ECPoint Q, byte[] hash, BigInteger[] sig)
    {
        X9ECParameters x9 = SecNamedCurves.GetByName("secp256k1");
        ECDomainParameters ec = new ECDomainParameters(x9.Curve, x9.G, x9.N, x9.H, x9.GetSeed());
        ECPublicKeyParameters publicKey = new ECPublicKeyParameters(Q, ec);
        return VerifySignature(publicKey, hash, sig);
    }

    public static bool VerifySignature(ECPublicKeyParameters publicKey, byte[] hash, BigInteger[] sig)
    {
        ECDsaSigner signer = new ECDsaSigner();
        signer.Init(false, publicKey);
        return signer.VerifySignature(hash, sig[0], sig[1]);
    }

    private static BigInteger CalculateE(
        BigInteger n,
        byte[] message)
    {
        int messageBitLength = message.Length * 8;
        BigInteger trunc = new BigInteger(1, message);

        if (n.BitLength < messageBitLength)
        {
            trunc = trunc.ShiftRight(messageBitLength - n.BitLength);
        }

        return trunc;
    }

    public static byte[] FormatMessageForSigning(String message)
    {
        MemoryStream bos = new MemoryStream();
        bos.WriteByte((byte)BITCOIN_SIGNED_MESSAGE_HEADER_BYTES.Length);
        bos.Write(BITCOIN_SIGNED_MESSAGE_HEADER_BYTES, 0, BITCOIN_SIGNED_MESSAGE_HEADER_BYTES.Length);
        byte[] messageBytes = Encoding.UTF8.GetBytes(message);

        //VarInt size = new VarInt(messageBytes.length);
        //bos.write(size.encode());
        // HACK only works for short messages (< 253 bytes)
        bos.WriteByte((byte)messageBytes.Length);

        bos.Write(messageBytes, 0, messageBytes.Length);
        return bos.ToArray();
    }

Sample output for the initial data in the question:

Q: 0283437893b491218348bf5ff149325e47eb628ce36f73a1a927ae6cb6021c7ac4
RIPEMD-160(SHA-256(Q)): cbe57ebe20ad59518d14926f8ab47fecc984af49
Signature verified correctly: True

If we plug the RIPEMD-160 value into the address checker, it returns

1Kb76YK9a4mhrif766m321AMocNvzeQxqV

as given in the question.

0 讨论(0)

迷失自我

2021-02-04 00:24

I'm afraid there are some problems with your sample data. First of all your sample Q is 61 bytes long, but Bitcoin public keys (using secp256k1 curve) should be 65 bytes in their uncompressed form. The Q you supplied does not verify the message correctly, but the Q I have calculated does seem to verify it.

I wrote code that calculates the correct public key for string "StackOverflow test 123" and verifies it using ECDsaSigner. However, the hash for this public key is 1HRDe7G7tn925iNxQaeD7R2ZkZiKowN8NW instead of 1Kb76YK9a4mhrif766m321AMocNvzeQxqV.

Can you please verify that your data is correct and maybe give the exact hash of the message string so that we could try to debug, an incorrect hash can mess things up quite bad. The code I have used is following:

using System;
using System.Text;
using System.Security.Cryptography;

using Org.BouncyCastle.Math;
using Org.BouncyCastle.Math.EC;
using Org.BouncyCastle.Asn1.X9;
using Org.BouncyCastle.Crypto.Signers;
using Org.BouncyCastle.Crypto.Parameters;
using Org.BouncyCastle.Utilities.Encoders;

public class Bitcoin
{
  public static ECPoint Recover(byte[] hash, byte[] sigBytes, int rec)
  {
    BigInteger r = new BigInteger(1, sigBytes, 0, 32);
    BigInteger s = new BigInteger(1, sigBytes, 32, 32);
    BigInteger[] sig = new BigInteger[]{ r, s };
    ECPoint Q = ECDSA_SIG_recover_key_GFp(sig, hash, rec, true);
    return Q;
  }

  public static ECPoint ECDSA_SIG_recover_key_GFp(BigInteger[] sig, byte[] hash, int recid, bool check)
  {
    X9ECParameters ecParams = Org.BouncyCastle.Asn1.Sec.SecNamedCurves.GetByName("secp256k1");
    int i = recid / 2;

    Console.WriteLine("r: "+ToHex(sig[0].ToByteArrayUnsigned()));
    Console.WriteLine("s: "+ToHex(sig[1].ToByteArrayUnsigned()));

    BigInteger order = ecParams.N;
    BigInteger field = (ecParams.Curve as FpCurve).Q;
    BigInteger x = order.Multiply(new BigInteger(i.ToString())).Add(sig[0]);
    if (x.CompareTo(field) >= 0) throw new Exception("X too large");

    Console.WriteLine("Order: "+ToHex(order.ToByteArrayUnsigned()));
    Console.WriteLine("Field: "+ToHex(field.ToByteArrayUnsigned()));

    byte[] compressedPoint = new Byte[x.ToByteArrayUnsigned().Length+1];
    compressedPoint[0] = (byte) (0x02+(recid%2));
    Buffer.BlockCopy(x.ToByteArrayUnsigned(), 0, compressedPoint, 1, compressedPoint.Length-1);
    ECPoint R = ecParams.Curve.DecodePoint(compressedPoint);

    Console.WriteLine("R: "+ToHex(R.GetEncoded()));

    if (check)
    {
      ECPoint O = R.Multiply(order);
      if (!O.IsInfinity) throw new Exception("Check failed");
    }

    int n = (ecParams.Curve as FpCurve).Q.ToByteArrayUnsigned().Length*8;
    BigInteger e = new BigInteger(1, hash);
    if (8*hash.Length > n)
    {
      e = e.ShiftRight(8-(n & 7));
    }
    e = BigInteger.Zero.Subtract(e).Mod(order);
    BigInteger rr = sig[0].ModInverse(order);
    BigInteger sor = sig[1].Multiply(rr).Mod(order);
    BigInteger eor = e.Multiply(rr).Mod(order);
    ECPoint Q = ecParams.G.Multiply(eor).Add(R.Multiply(sor));

    Console.WriteLine("n: "+n);
    Console.WriteLine("e: "+ToHex(e.ToByteArrayUnsigned()));
    Console.WriteLine("rr: "+ToHex(rr.ToByteArrayUnsigned()));
    Console.WriteLine("sor: "+ToHex(sor.ToByteArrayUnsigned()));
    Console.WriteLine("eor: "+ToHex(eor.ToByteArrayUnsigned()));
    Console.WriteLine("Q: "+ToHex(Q.GetEncoded()));

    return Q;
  }

  public static bool VerifySignature(byte[] pubkey, byte[] hash, byte[] sigBytes)
  {
    X9ECParameters ecParams = Org.BouncyCastle.Asn1.Sec.SecNamedCurves.GetByName("secp256k1");
    ECDomainParameters domainParameters = new ECDomainParameters(ecParams.Curve,
                                                                 ecParams.G, ecParams.N, ecParams.H,
                                                                 ecParams.GetSeed());

    BigInteger r = new BigInteger(1, sigBytes, 0, 32);
    BigInteger s = new BigInteger(1, sigBytes, 32, 32);
    ECPublicKeyParameters publicKey = new ECPublicKeyParameters(ecParams.Curve.DecodePoint(pubkey), domainParameters);

    ECDsaSigner signer = new ECDsaSigner();
    signer.Init(false, publicKey);
    return signer.VerifySignature(hash, r, s);
  }



  public static void Main()
  {
    string msg = "StackOverflow test 123";
    string sig = "IB7XjSi9TdBbB3dVUK4+Uzqf2Pqk71XkZ5PUsVUN+2gnb3TaZWJwWW2jt0OjhHc4B++yYYRy1Lg2kl+WaiF+Xsc=";
    string pubkey = "045894609CCECF9A92533F630DE713A958E96C97CCB8F5ABB5A688A238DEED6DC2D9D0C94EBFB7D526BA6A61764175B99CB6011E2047F9F067293F57F5";

    SHA256Managed sha256 = new SHA256Managed();
    byte[] hash = sha256.ComputeHash(Encoding.UTF8.GetBytes(msg), 0, Encoding.UTF8.GetByteCount(msg));
    Console.WriteLine("Hash: "+ToHex(hash));

    byte[] tmpBytes = Convert.FromBase64String(sig);
    byte[] sigBytes = new byte[tmpBytes.Length-1];
    Buffer.BlockCopy(tmpBytes, 1, sigBytes, 0, sigBytes.Length);

    int rec = (tmpBytes[0] - 27) & ~4;
    Console.WriteLine("Rec {0}", rec);

    ECPoint Q = Recover(hash, sigBytes, rec);
    string qstr = ToHex(Q.GetEncoded());
    Console.WriteLine("Q is same as supplied: "+qstr.Equals(pubkey));

    Console.WriteLine("Signature verified correctly: "+VerifySignature(Q.GetEncoded(), hash, sigBytes));
  }

  public static string ToHex(byte[] data)
  {
    return BitConverter.ToString(data).Replace("-","");
  }
}

EDIT I see this is still not commented on or accepted, so I wrote a full test that generates a private key and a public key, then generates a valid signature using the private key. After that it recovers the public key from the signature and hash and uses that public key to verify the signature of the message. Please see below, if there are still some questions please let me know.

  public static void FullSignatureTest(byte[] hash)
  {
    X9ECParameters ecParams = Org.BouncyCastle.Asn1.Sec.SecNamedCurves.GetByName("secp256k1");
    ECDomainParameters domainParameters = new ECDomainParameters(ecParams.Curve,
                                                                 ecParams.G, ecParams.N, ecParams.H,
                                                                 ecParams.GetSeed());
    ECKeyGenerationParameters keyGenParams =
      new ECKeyGenerationParameters(domainParameters, new SecureRandom());

    AsymmetricCipherKeyPair keyPair;
    ECKeyPairGenerator generator = new ECKeyPairGenerator();
    generator.Init(keyGenParams);
    keyPair = generator.GenerateKeyPair();

    ECPrivateKeyParameters privateKey = (ECPrivateKeyParameters) keyPair.Private;
    ECPublicKeyParameters publicKey = (ECPublicKeyParameters) keyPair.Public;

    Console.WriteLine("Generated private key: " + ToHex(privateKey.D.ToByteArrayUnsigned()));
    Console.WriteLine("Generated public key: " + ToHex(publicKey.Q.GetEncoded()));

    ECDsaSigner signer = new ECDsaSigner();
    signer.Init(true, privateKey);
    BigInteger[] sig = signer.GenerateSignature(hash);

    int recid = -1;
    for (int rec=0; rec<4; rec++) {
      try
      {
        ECPoint Q = ECDSA_SIG_recover_key_GFp(sig, hash, rec, true);
        if (ToHex(publicKey.Q.GetEncoded()).Equals(ToHex(Q.GetEncoded())))
        {
          recid = rec;
          break;
        }
      }
      catch (Exception)
      {
        continue;
      }
    }
    if (recid < 0) throw new Exception("Did not find proper recid");

    byte[] fullSigBytes = new byte[65];
    fullSigBytes[0] = (byte) (27+recid);
    Buffer.BlockCopy(sig[0].ToByteArrayUnsigned(), 0, fullSigBytes, 1, 32);
    Buffer.BlockCopy(sig[1].ToByteArrayUnsigned(), 0, fullSigBytes, 33, 32);

    Console.WriteLine("Generated full signature: " + Convert.ToBase64String(fullSigBytes));

    byte[] sigBytes = new byte[64];
    Buffer.BlockCopy(sig[0].ToByteArrayUnsigned(), 0, sigBytes, 0, 32);
    Buffer.BlockCopy(sig[1].ToByteArrayUnsigned(), 0, sigBytes, 32, 32);

    ECPoint genQ = ECDSA_SIG_recover_key_GFp(sig, hash, recid, false);
    Console.WriteLine("Generated signature verifies: " + VerifySignature(genQ.GetEncoded(), hash, sigBytes));
  }

0 讨论(0)