ARM TrustZone development

Question

I am wondering if anyone have any information on development boards where you can utilize ARM TrustZone? I have the BeagleBoard XM which uses TI\'s OMAP3530 with Cortex-A8 proce

Answer 1

There are a few select boards at this time that do allow development with TrustZone. As far as general purpose board, the FriendlyARM board is a good start (http://www.friendlyarm.net). Also, any board with a Cortex A15 processor must have TrustZone available due to the fact that the virtualization extensions can only be utilized from the Normal world. There may still be a question of whether or not the manufacturer has their own code running in the Secure world, but you can always try. The Arndale is a good development board, but unfortunately Samsung already has code running in the Secure world, so by the time you get access, you're running in the Normal world. So if you need Secure world access, look for non-Samsung, Cortex A15 processors. That'd be your best bet.

It's also worth noting the TI did not technically disable TrustZone. Instead, the bootrom code transitions the processor into the Normal world prior to switching execution to U-boot. So it's actually using TrustZone to move to the Normal world, but then doesn't provide a mechanism for moving back to the Secure world. To prove this, just try to read the SCR and you'll get an undefined exception, which is what will typically happen from the Normal world. However, if you perform a SMC call, it will execute just as expected (i.e., it switches to the Secure world, but then just switches right back to the Normal world), so it looks like nothing happened.