What is the most efficient way to represent small values in a struct?

Question

Often I find myself having to represent a structure that consists of very small values. For example, Foo has 4 values, a, b, c, d that, range from

Answer 1

Fitting your data set in cache is critical. Smaller is always better, because hyperthreading competitively shares the per-core caches between the hardware threads (on Intel CPUs). Comments on this answer include some numbers for costs of cache misses.

On x86, loading 8bit values with sign or zero-extension into 32 or 64bit registers (movzx or movsx) is literally just as fast as plain mov of a byte or 32bit dword. Storing the low byte of a 32bit register also has no overhead. (See Agner Fog's instruction tables and C / asm optimization guides here).

Still x86-specific: [u]int8_t temporaries are ok, too, but avoid [u]int16_t temporaries. (load/store from/to [u]int16_t in memory is fine, but working with 16bit values in registers has big penalties from the operand-size prefix decoding slowly on Intel CPUs.) 32bit temporaries will be faster if you want to use them as an array index. (Using 8bit registers doesn't zero the high 24/56bits, so it takes an extra instruction to zero or sign-extend, to use an 8bit register as an array index, or in an expression with a wider type (like adding it to an int.)

I'm unsure what ARM or other architectures can do as far as efficient zero/sign extension from single-byte loads, or for single-byte stores.

Given this, my recommendation is pack for storage, use int for temporaries. (Or long, but that will increase code size slightly on x86-64, because a REX prefix is needed to specify a 64bit operand size.) e.g.

int a_i = foo[i].a;
int b_i = foo[i].b;
...;
foo[i].a = a_i + b_i;

bitfields

Packing into bitfields will have more overhead, but can still be worth it. Testing a compile-time-constant-bit-position (or multiple bits) in a byte or 32/64bit chunk of memory is fast. If you actually need to unpack some bitfields into ints and pass them to a non-inline function call or something, that will take a couple extra instructions to shift and mask. If this gives even a small reduction in cache misses, this can be worth it.

Testing, setting (to 1) or clearing (to 0) a bit or group of bits can be done efficiently with OR or AND, but assigning an unknown boolean value to a bitfield takes more instructions to merge the new bits with the bits for other fields. This can significantly bloat code if you assign a variable to a bitfield very often. So using int foo:6 and things like that in your structs, because you know foo doesn't need the top two bits, is not likely to be helpful. If you're not saving many bits compared to putting each thing in it's own byte/short/int, then the reduction in cache misses won't outweigh the extra instructions (which can add up into I-cache / uop-cache misses, as well as the direct extra latency and work of the instructions.)

The x86 BMI1 / BMI2 (Bit-Manipulation) instruction-set extensions will make copying data from a register into some destination bits (without clobbering the surrounding bits) more efficient. BMI1: Haswell, Piledriver. BMI2: Haswell, Excavator(unreleased). Note that like SSE/AVX, this will mean you'd need BMI versions of your functions, and fallback non-BMI versions for CPUs that don't support those instructions. AFAIK, compilers don't have options to see patterns for these instructions and use them automatically. They're only usable via intrinsics (or asm).

Dbush's answer, packing into bitfields is probably a good choice, depending on how you use your fields. Your fourth option (of packing four separate abcd values into one struct) is probably a mistake, unless you can do something useful with four sequential abcd values (vector-style).

code generically, try both ways

For a data structure your code uses extensively, it makes sense to set things up so you can flip from one implementation to another, and benchmark. Nir Friedman's answer, with getters/setters is a good way to go. However, just using int temporaries and working with the fields as separate members of the struct should work fine. It's up to the compiler to generate code to test the right bits of a byte, for packed bitfields.

prepare for SIMD, if warranted

If you have any code that checks just one or a couple fields of each struct, esp. looping over sequential struct values, then the struct-of-arrays answer given by cmaster will be useful. x86 vector instructions have a single byte as the smallest granularity, so a struct-of-arrays with each value in a separate byte would let you quickly scan for the first element where a == something, using PCMPEQB / PTEST.