Manipulating axis titles in ggpairs (GGally)

Question

I\'m using the code below to generate the following chart.

# Setup
data(airquality)

# Device start
png(filename = \"example.png\", units = \"cm\", width = 20, h         


        

Answer 1

Short answer: There doesn't seem to be an elegant or easy way to do it, but here's a workaround.

I dug into the ggpairs source code (in the GGally package source available from CRAN) to see how the variable labels are actually drawn. The relevant function in ggpairs.R is print.ggpairs. It turns out the variable labels aren't part of the ggplot objects in each cell of the plot matrix -- i.e. they're not axis titles, which is why they aren't affected by using theme(axis.title.x = element_text(angle = 45) or similar.

Rather, they seem to be drawn as text annotations using grid.text (in package 'grid'). grid.text takes arguments including x, y, hjust, vjust, rot (where rot is angle of rotation), as well as font size, font family, etc. using gpar (see ?grid.text), but it looks like there is currently no way to pass in different values of those parameters to print.ggpairs -- they're fixed at default values.

You can work around it by leaving your variable labels blank to begin with, and then adding them on later with customized placement, rotation, and styling, using a modification of the relevant part of the print.ggpairs code. I came up with the following modification. (Incidentally, because the original GGally source code was released under a GPL-3 license, so is this modification.)

customize.labels <- function(
  plotObj,
  varLabels = NULL, #vector of variable labels
  titleLabel = NULL, #string for title
  leftWidthProportion = 0.2, #if you changed these from default...
  bottomHeightProportion = 0.1, #when calling print(plotObj),...
  spacingProportion = 0.03, #then change them the same way here so labels will line up with plot matrix.
  left.opts = NULL, #see pattern in left.opts.default
  bottom.opts = NULL, #see pattern in bottom.opts.default
  title.opts = NULL) { #see pattern in title.opts.default

  require('grid')

  vplayout <- function(x, y) {
    viewport(layout.pos.row = x, layout.pos.col = y)
  }

  numCol <- length(plotObj$columns)
  if (is.null(varLabels)) {
    varLabels <- colnames(plotObj$data)
    #default to using the column names of the data
  } else if (length(varLabels) != numCol){
    stop('Length of varLabels must be equal to the number of columns')
  }

  #set defaults for left margin label style
  left.opts.default <- list(x=0,
                            y=0.5,
                            rot=90,
                            just=c('centre', 'centre'), #first gives horizontal justification, second gives vertical
                            gp=list(fontsize=get.gpar('fontsize')))
  #set defaults for bottom margin label style
  bottom.opts.default <- list(x=0,
                              y=0.5,
                              rot=0,
                              just=c('centre', 'centre'),#first gives horizontal justification, second gives vertical
                              gp=list(fontsize=get.gpar('fontsize')))
  #set defaults for title text style
  title.opts.default <- list(x = 0.5, 
                             y = 1, 
                             just = c(.5,1),
                             gp=list(fontsize=15))

  #if opts not provided, go with defaults
  if (is.null(left.opts)) {
    left.opts <- left.opts.default
  } else{
    not.given <- names(left.opts.default)[!names(left.opts.default) %in% 
                                            names(left.opts)]
if (length(not.given)>0){
  left.opts[not.given] <- left.opts.default[not.given]
}
  }

if (is.null(bottom.opts)) {
  bottom.opts <- bottom.opts.default
} else{
  not.given <- names(bottom.opts.default)[!names(bottom.opts.default) %in%
                                            names(bottom.opts)]
if (length(not.given)>0){
  bottom.opts[not.given] <- bottom.opts.default[not.given]
}
}

if (is.null(title.opts)) {
  title.opts <- title.opts.default
} else{
  not.given <- names(title.opts.default)[!names(title.opts.default) %in%
                                           names(title.opts)]
if (length(not.given)>0){
  title.opts[not.given] <- title.opts.default[not.given]
}
}

  showLabels <- TRUE
  viewPortWidths <- c(leftWidthProportion, 
                      1, 
                      rep(c(spacingProportion,1), 
                          numCol - 1))
  viewPortHeights <- c(rep(c(1,
                             spacingProportion), 
                           numCol - 1), 
                       1, 
                       bottomHeightProportion)

viewPortCount <- length(viewPortWidths)

if(!is.null(titleLabel)){
  pushViewport(viewport(height = unit(1,"npc") - unit(.4,"lines")))
  do.call('grid.text', c(title.opts[names(title.opts)!='gp'], 
                         list(label=titleLabel, 
                              gp=do.call('gpar', 
                                      title.opts[['gp']]))))
  popViewport()
}

  # viewport for Left Names
  pushViewport(viewport(width=unit(1, "npc") - unit(2,"lines"), 
                        height=unit(1, "npc") - unit(3, "lines")))

  ## new for axis spacingProportion
  pushViewport(viewport(layout = grid.layout(
    viewPortCount, viewPortCount,
    widths = viewPortWidths, heights = viewPortHeights
  )))

  # Left Side
  for(i in 1:numCol){
    do.call('grid.text', 
            c(left.opts[names(left.opts)!='gp'], 
              list(label=varLabels[i], 
                   vp = vplayout(as.numeric(i) * 2 - 1 ,1),
                   gp=do.call('gpar', 
                           left.opts[['gp']]))))
  }
  popViewport()# layout
  popViewport()# spacing

  # viewport for Bottom Names
  pushViewport(viewport(width=unit(1, "npc") - unit(3,"lines"), 
                        height=unit(1, "npc") - unit(2, "lines")))

  ## new for axis spacing
  pushViewport(viewport(layout = grid.layout(
    viewPortCount, viewPortCount,
    widths = viewPortWidths, heights = viewPortHeights)))

  # Bottom Side
  for(i in 1:numCol){
    do.call('grid.text', 
            c(bottom.opts[names(bottom.opts)!='gp'], 
              list(label=varLabels[i], 
                   vp = vplayout(2*numCol, 2*i),
                   gp=do.call('gpar', 
                           bottom.opts[['gp']]))))
  }

  popViewport() #layout
  popViewport() #spacing
}

And here's an example of calling that function:

require('data.table')
require('GGally')
require('grid')
fake.data <- data.table(test.1=rnorm(50), #make some fake data for  demonstration
                        test.2=rnorm(50), 
                        test.3=rnorm(50),
                        test.4=rnorm(50))

g <- ggpairs(data=fake.data, 
             columnLabels=rep('', ncol(fake.data)))
#Set columnLabels to a vector of blank column labels
#so that original variable labels will be blank.
print(g)


customize.labels(plotObj=g,
                 titleLabel = 'Test plot', #string for title
                 left.opts = list(x=-0.5, #moves farther to the left, away from vertical axis
                                  y=0.5, #centered with respect to vertical axis
                                  just=c('center', 'center'),
                                  rot=90,
                                  gp=list(col='red',
                                          fontface='italic',
                                          fontsize=12)), 
                 bottom.opts = list(x=0.5,
                                    y=0,
                                    rot=45, #angle the text at 45 degrees
                                    just=c('center', 'top'),
                                    gp=list(col='red',
                                            fontface='bold',
                                            fontsize=10)), 
                 title.opts = list(gp=list(col='green',
                                           fontface='bold.italic'))
)

(This makes some very ugly labels -- for the purposes of demonstration only!)

I didn't tinker with placing the labels somewhere other than the left and bottom -- as in your Geovisualist example -- but I think you'd do it by changing the arguments to vplayout in the "Left Side" and "Bottom Side" pieces of code in customize.labels. The x and y coordinates in grid.text are defined relative to a viewport, which divides the display area into a grid in

pushViewport(viewport(layout = grid.layout(
        viewPortCount, viewPortCount,
        widths = viewPortWidths, heights = viewPortHeights
      )))

The call to vplayout specifies which cell of the grid is being used to position each label.