how does the processor read memory?

Question

I\'m trying to re-implement malloc and I need to understand the purpose of the alignment. As I understand it, if the memory is aligned, the code will be executed faster because

Answer 1

The effects can even include correctness, not just performance: C Undefined Behaviour (UB) leading to possible segfaults or other misbehaviour if you have a short object that doesn't satisfy alignof(short). (Faulting is expected on ISAs where load/store instructions require alignment by default, like SPARC, and MIPS before MIPS64r6)

Or tearing of atomic operations if an _Atomic int doesn't have alignof(_Atomic int).

(Typically alignof(T) = sizeof(T) up to some size, often register width or wider, in any given ABI).

---

malloc should return memory with alignof(max_align_t) because you don't have any type info about how the allocation will be used.

For allocations smaller than sizeof(max_align_t), you can return memory that's merely naturally aligned (e.g. a 4-byte allocation aligned by 4 bytes) if you want, because you know that storage can't be used for anything with a higher alignment requirement.

Over-aligned stuff like the dynamically-allocated equivalent of alignas (16) int32_t foo needs to use a special allocator like C11 aligned_alloc. If you're implementing your own allocator library, you probably want to support aligned_realloc and aligned_calloc, filling those gaps that ISO C leave for no apparent reason.

And make sure you don't implement the braindead ISO C++17 requirement for aligned_alloc to fail if the allocation size isn't a multiple of the alignment. Nobody wants an allocator that rejects an allocation of 101 floats starting on a 16-byte boundary, or much larger for better transparent hugepages. aligned_alloc function requirements and How to solve the 32-byte-alignment issue for AVX load/store operations?

---

I think I understand that a 64-bit processor reads 64-bit by 64-bit memory

Nope. Data bus width and burst size, and load/store execution unit max width or actually-used width, don't have to be the same as width of integer registers, or however the CPU defines its bitness. (And in modern high performance CPUs typically aren't. e.g. 32-bit P5 Pentium had a 64-bit bus; modern 32-bit ARM has load/store-pair instructions that do atomic 64-bit accesses.)

Processors read whole cache lines from DRAM / L3 / L2 cache into L1d cache; 64 bytes on modern x86; 32 bytes on some other systems.

And when reading individual objects or array elements, they read from L1d cache with the element width. e.g. a uint16_t array may only benefit from alignment to a 2-byte boundary for 2-byte loads/stores.

Or if a compiler vectorizes a loop with SIMD, a uint16_t array can be read 16 or 32 bytes at a time, i.e. SIMD vectors of 8 or 16 elements. (Or even 64 with AVX512). Aligning arrays to the expected vector width can be helpful; unaligned SIMD load/store run fast on modern x86 when they don't cross a cache-line boundary.

---

Cache-line splits and especially page-splits are where modern x86 slows down from misalignment; unaligned within a cache line generally not because they spend the transistors for fast unaligned load/store. Some other ISAs slow down, and some even fault, on any misalignment, even within a cache line. The solution is the same: give types natural alignment: alignof(T) = sizeof(T).

In your struct example, modern x86 CPUs will have no penalty even though the short is misaligned. alignof(int) = 4 in any normal ABI, so the whole struct has alignof(struct) = 4, so the char;short;char block starts at a 4-byte boundary. Thus the short is contained within a single 4-byte dword, not crossing any wider boundary. AMD and Intel both handle this with full efficiency. (And the x86 ISA guarantees that accesses to it are atomic, even uncached, on CPUs compatible with P5 Pentium or later: Why is integer assignment on a naturally aligned variable atomic on x86?)

Some non-x86 CPUs would have penalties for the misaligned short, or have to use other instructions. (Since you know the alignment relative to an aligned 32-bit chunk, for loads you'd probably do a 32-bit load and shift.)

So yes there's no problem accessing one single word containing the short, but the problem is for load-port hardware to extract and zero-extend (or sign-extend) that short into a full register. This is where x86 spends the transistors to make this fast. (@Eric's answer on a previous version of this question goes into more detail about the shifting required.)

Committing an unaligned store back into cache is also non-trivial. For example, L1d cache might have ECC (error-correction against bit flips) in 32-bit or 64-bit chunks (which I'll call "cache words"). Writing only part of a cache word is thus a problem for that reason, as well as for shifting it to an arbitrary byte boundary within the cache word you want to access. (Coalescing of adjacent narrow stores in the store buffer can produce a full-width commit that avoids an RMW cycle to update part of a word, in caches that handle narrow stores that way). Note that I'm saying "word" now because I'm talking about hardware that's more word-oriented instead of being designed around unaligned loads/stores the way modern x86 is. See Are there any modern CPUs where a cached byte store is actually slower than a word store? (storing a single byte is only slightly simpler than an unaligned short)

(If the short spans two cache words, it would of course needs to separate RMW cycles, one for each byte.)

And of course the short is misaligned for the simple reason that alignof(short) = 2 and it violates this ABI rule (assuming an ABI that does have that). So if you pass a pointer to it to some other function, you could get into trouble. Especially on CPUs that have fault-on-misaligned loads, instead of hardware handling that case when it turns out to be misaligned at runtime. Then you can get cases like Why does unaligned access to mmap'ed memory sometimes segfault on AMD64? where GCC auto-vectorization expected to reach a 16-byte boundary by doing some multiple of 2-byte elements scalar, so violating the ABI leads to a segfault on x86 (which is normally tolerant of misalignment.)

---

For the full details on memory access, from DRAM RAS / CAS latency up to cache bandwidth and alignment, see What Every Programmer Should Know About Memory? It's pretty much still relevant / applicable

Also Purpose of memory alignment has a nice answer. There are plenty of other good answers in SO's memory-alignment tag.

For a more detailed look at (somewhat) modern Intel load/store execution units, see: https://electronics.stackexchange.com/questions/329789/how-can-cache-be-that-fast/329955#329955

---

how does the processor know when it reads its 64 bits that the first 8 bits correspond to a char, then the next 16 correspond to a short etc...?

It doesn't, other than the fact it's running instructions which treat the data that way.

In asm / machine-code, everything is just bytes. Every instruction specifies exactly what to do with which data. It's up to the compiler (or human programmer) to implement variables with types, and the logic of a C program, on top of a raw array of bytes (main memory).

What I mean by that is that in asm, you can run any load or store instruction you want to, and it's up to you to use the right ones on the right addresses. You could load 4 bytes that overlap two adjacent int variable into a floating-point register, then and run addss (single-precision FP add) on it, and the CPU won't complain. But you probably don't want to because making the CPU interpret those 4 bytes as an IEEE754 binary32 float is unlikely to be meaningful.