RGB value to HSL converter

Question

Google maps api v3 allows \"styles\" to be applied to the map, including setting the color of various features. However, the color format it uses is HSL (or what seems like

Answer 1

From the linked page:

Note: while hue takes an HTML hex color value, it only uses this value to determine the basic color (its orientation around the color wheel), not its saturation or lightness, which are indicated separately as percentage changes. For example, the hue for pure green may be defined as "#00ff00" or "#000100" within the hue property and both hues will be identical. (Both values point to pure green in the HSL color model.) RGB hue values which consist of equal parts Red, Green and Blue — such as "#000000" (black) and "#FFFFFF" (white) and all the pure shades of grey — do not indicate a hue whatsoever, as none of those values indicate an orientation in the HSL coordinate space. To indicate black, white or grey, you must remove all saturation (set the value to -100) and adjust lightness instead.

At least as I read it, that means you need to convert your angle based on a color wheel. For example, let's assume 0 degrees is pure red, 120 degrees is pure blue and 240 degrees is pure green. You'd then take your angle, figure out which two primaries it falls between, and interpolate to determine how much of each primary to use. In theory you should probably use a quadratic interpolation -- but chances are that you can get by reasonably well with linear.

Using that, 90 degrees (for example) is 90/120 = 3/4^ths of the way from red to blue, so your hex number for the hue would be 0x00010003 -- or any other number that had green set to 0, and a 1:3 ratio between red and blue.