How do I obtain the frequencies of each value in an FFT?

Question

I have an FFT result. These are stored in two double arrays: a real part array and an imaginary part array. How do I determine the frequencies that correspond t

Answer 1

The first bin in the FFT is DC (0 Hz), the second bin is Fs / N, where Fs is the sample rate and N is the size of the FFT. The next bin is 2 * Fs / N. To express this in general terms, the nth bin is n * Fs / N.

So if your sample rate, Fs is say 44.1 kHz and your FFT size, N is 1024, then the FFT output bins are at:

  0:   0 * 44100 / 1024 =     0.0 Hz
  1:   1 * 44100 / 1024 =    43.1 Hz
  2:   2 * 44100 / 1024 =    86.1 Hz
  3:   3 * 44100 / 1024 =   129.2 Hz
  4: ...
  5: ...
     ...
511: 511 * 44100 / 1024 = 22006.9 Hz

Note that for a real input signal (imaginary parts all zero) the second half of the FFT (bins from N / 2 + 1 to N - 1) contain no useful additional information (they have complex conjugate symmetry with the first N / 2 - 1 bins). The last useful bin (for practical aplications) is at N / 2 - 1, which corresponds to 22006.9 Hz in the above example. The bin at N / 2 represents energy at the Nyquist frequency, i.e. Fs / 2 ( = 22050 Hz in this example), but this is in general not of any practical use, since anti-aliasing filters will typically attenuate any signals at and above Fs / 2.