I am running this test on a cpu with constant_tsc
and nonstop_tsc
$ grep -m 1 ^flags /proc/cpuinfo | sed \'s/ /\\n/g\' | egrep \"consta
The reason for the drift seen in the OP, at least on my machine, is that the TSC ticks per ns drifts away from its original value of _ticks_per_ns
. The following results were from this machine:
don@HAL:~/UNIX/OS/3EZPcs/Ch06$ uname -a
Linux HAL 4.4.0-81-generic #104-Ubuntu SMP Wed Jun 14 08:17:06 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
don@HAL:~/UNIX/OS/3EZPcs/Ch06$ cat /sys/devices/system/clocksource/clocksource0/current_clocksource
tsc
cat /proc/cpuinfo
shows constant_tsc
and nonstop_tsc
flags.
viewRates.cc can be run to see the current TSC Ticks per ns on a machine:
rdtscp.h:
static inline unsigned long rdtscp_start(void) {
unsigned long var;
unsigned int hi, lo;
__asm volatile ("cpuid\n\t"
"rdtsc\n\t" : "=a" (lo), "=d" (hi)
:: "%rbx", "%rcx");
var = ((unsigned long)hi << 32) | lo;
return (var);
}
static inline unsigned long rdtscp_end(void) {
unsigned long var;
unsigned int hi, lo;
__asm volatile ("rdtscp\n\t"
"mov %%edx, %1\n\t"
"mov %%eax, %0\n\t"
"cpuid\n\t" : "=r" (lo), "=r" (hi)
:: "%rax", "%rbx", "%rcx", "%rdx");
var = ((unsigned long)hi << 32) | lo;
return (var);
}
/*see https://www.intel.com/content/www/us/en/embedded/training/ia-32-ia-64-benchmark-code-execution-paper.html
*/
viewRates.cc:
#include
#include
#include
#include
#include
#include "rdtscp.h"
using std::cout; using std::cerr; using std::endl;
#define CLOCK CLOCK_REALTIME
uint64_t to_ns(const timespec &ts); // Converts a struct timespec to ns (since epoch).
void view_ticks_per_ns(int runs =10, int sleep =10);
int main(int argc, char **argv) {
int runs = 10, sleep = 10;
if (argc != 1 && argc != 3) {
cerr << "Usage: " << argv[0] << " [ RUNS SLEEP ] \n";
exit(1);
} else if (argc == 3) {
runs = std::atoi(argv[1]);
sleep = std::atoi(argv[2]);
}
view_ticks_per_ns(runs, sleep);
}
void view_ticks_per_ns(int RUNS, int SLEEP) {
// Prints out stream of RUNS tsc ticks per ns, each calculated over a SLEEP secs interval.
timespec clock_start, clock_end;
unsigned long tsc1, tsc2, tsc_start, tsc_end;
unsigned long elapsed_ns, elapsed_ticks;
double rate; // ticks per ns from each run.
clock_getres(CLOCK, &clock_start);
cout << "Clock resolution: " << to_ns(clock_start) << "ns\n\n";
cout << " tsc ticks " << "ns " << " tsc ticks per ns\n";
for (int i = 0; i < RUNS; ++i) {
tsc1 = rdtscp_start();
clock_gettime(CLOCK, &clock_start);
tsc2 = rdtscp_end();
tsc_start = (tsc1 + tsc2) / 2;
sleep(SLEEP);
tsc1 = rdtscp_start();
clock_gettime(CLOCK, &clock_end);
tsc2 = rdtscp_end();
tsc_end = (tsc1 + tsc2) / 2;
elapsed_ticks = tsc_end - tsc_start;
elapsed_ns = to_ns(clock_end) - to_ns(clock_start);
rate = static_cast(elapsed_ticks) / elapsed_ns;
cout << elapsed_ticks << " " << elapsed_ns << " " << std::setprecision(12) << rate << endl;
}
}
linearExtrapolator.cc can be run to re-create the experiment of the OP:
linearExtrapolator.cc:
#include
#include
#include
#include
#include
#include
#include "rdtscp.h"
using std::cout; using std::endl; using std::array;
#define CLOCK CLOCK_REALTIME
uint64_t to_ns(const timespec &ts); // Converts a struct timespec to ns (since epoch).
void set_ticks_per_ns(bool set_rate); // Display or set tsc ticks per ns, _ticks_per_ns.
void get_start(); // Sets the 'start' time point: _start_tsc[in ticks] and _start_clock_time[in ns].
uint64_t tsc_to_ns(uint64_t tsc); // Convert tsc ticks since _start_tsc to ns (since epoch) linearly using
// _ticks_per_ns with origin(0) at the 'start' point set by get_start().
uint64_t _start_tsc, _start_clock_time; // The 'start' time point as both tsc tick number, start_tsc, and as
// clock_gettime ns since epoch as _start_clock_time.
double _ticks_per_ns; // Calibrated in set_ticks_per_ns()
int main() {
set_ticks_per_ns(true); // Set _ticks_per_ns as the initial TSC ticks per ns.
uint64_t tsc1, tsc2, tsc_now, tsc_ns, utc_ns;
int64_t ns_diff;
bool first_pass{true};
for (int i = 0; i < 10; ++i) {
timespec utc_now;
if (first_pass) {
get_start(); //Get start time in both ns since epoch (_start_clock_time), and tsc tick number(_start_tsc)
cout << "_start_clock_time: " << _start_clock_time << ", _start_tsc: " << _start_tsc << endl;
utc_ns = _start_clock_time;
tsc_ns = tsc_to_ns(_start_tsc); // == _start_clock_time by definition.
tsc_now = _start_tsc;
first_pass = false;
} else {
tsc1 = rdtscp_start();
clock_gettime(CLOCK, &utc_now);
tsc2 = rdtscp_end();
tsc_now = (tsc1 + tsc2) / 2;
tsc_ns = tsc_to_ns(tsc_now);
utc_ns = to_ns(utc_now);
}
ns_diff = tsc_ns - (int64_t)utc_ns;
cout << "elapsed ns: " << utc_ns - _start_clock_time << ", elapsed ticks: " << tsc_now - _start_tsc
<< ", ns_diff: " << ns_diff << '\n' << endl;
set_ticks_per_ns(false); // Display current TSC ticks per ns (does not alter original _ticks_per_ns).
}
}
void set_ticks_per_ns(bool set_rate) {
constexpr int RUNS {1}, SLEEP{10};
timespec clock_start, clock_end;
uint64_t tsc1, tsc2, tsc_start, tsc_end;
uint64_t elapsed_ns[RUNS], elapsed_ticks[RUNS];
array rates; // ticks per ns from each run.
if (set_rate) {
clock_getres(CLOCK, &clock_start);
cout << "Clock resolution: " << to_ns(clock_start) << "ns\n";
}
for (int i = 0; i < RUNS; ++i) {
tsc1 = rdtscp_start();
clock_gettime(CLOCK, &clock_start);
tsc2 = rdtscp_end();
tsc_start = (tsc1 + tsc2) / 2;
sleep(SLEEP);
tsc1 = rdtscp_start();
clock_gettime(CLOCK, &clock_end);
tsc2 = rdtscp_end();
tsc_end = (tsc1 + tsc2) / 2;
elapsed_ticks[i] = tsc_end - tsc_start;
elapsed_ns[i] = to_ns(clock_end) - to_ns(clock_start);
rates[i] = static_cast(elapsed_ticks[i]) / elapsed_ns[i];
}
cout << " tsc ticks " << "ns " << "tsc ticks per ns" << endl;
for (int i = 0; i < RUNS; ++i)
cout << elapsed_ticks[i] << " " << elapsed_ns[i] << " " << std::setprecision(12) << rates[i] << endl;
if (set_rate)
_ticks_per_ns = rates[RUNS-1];
}
constexpr uint64_t BILLION {1000000000};
uint64_t to_ns(const timespec &ts) {
return ts.tv_sec * BILLION + ts.tv_nsec;
}
void get_start() { // Get start time both in tsc ticks as _start_tsc, and in ns since epoch as _start_clock_time
timespec ts;
uint64_t beg, end;
// loop to ensure we aren't interrupted between the two tsc reads
while (1) {
beg = rdtscp_start();
clock_gettime(CLOCK, &ts);
end = rdtscp_end();
if ((end - beg) <= 2000) // max ticks per clock call
break;
}
_start_tsc = (end + beg) / 2;
_start_clock_time = to_ns(ts); // converts timespec to ns since epoch
}
uint64_t tsc_to_ns(uint64_t tsc) { // Convert tsc ticks into absolute ns:
// Absolute ns is defined by this linear extrapolation from the start point where
//_start_tsc[in ticks] corresponds to _start_clock_time[in ns].
uint64_t diff = tsc - _start_tsc;
return _start_clock_time + static_cast(diff / _ticks_per_ns);
}
Here is output from a run of viewRates
immediately followed by linearExtrapolator
:
don@HAL:~/UNIX/OS/3EZPcs/Ch06$ ./viewRates
Clock resolution: 1ns
tsc ticks ns tsc ticks per ns
28070466526 10000176697 2.8069970538
28070500272 10000194599 2.80699540335
28070489661 10000196097 2.80699392179
28070404159 10000170879 2.80699245029
28070464811 10000197285 2.80699110338
28070445753 10000195177 2.80698978932
28070430538 10000194298 2.80698851457
28070427907 10000197673 2.80698730414
28070409903 10000195492 2.80698611597
28070398177 10000195328 2.80698498942
don@HAL:~/UNIX/OS/3EZPcs/Ch06$ ./linearExtrapolator
Clock resolution: 1ns
tsc ticks ns tsc ticks per ns
28070385587 10000197480 2.8069831264
_start_clock_time: 1497966724156422794, _start_tsc: 4758879747559
elapsed ns: 0, elapsed ticks: 0, ns_diff: 0
tsc ticks ns tsc ticks per ns
28070364084 10000193633 2.80698205596
elapsed ns: 10000247486, elapsed ticks: 28070516229, ns_diff: -3465
tsc ticks ns tsc ticks per ns
28070358445 10000195130 2.80698107188
elapsed ns: 20000496849, elapsed ticks: 56141027929, ns_diff: -10419
tsc ticks ns tsc ticks per ns
28070350693 10000195646 2.80698015186
elapsed ns: 30000747550, elapsed ticks: 84211534141, ns_diff: -20667
tsc ticks ns tsc ticks per ns
28070324772 10000189692 2.80697923105
elapsed ns: 40000982325, elapsed ticks: 112281986547, ns_diff: -34158
tsc ticks ns tsc ticks per ns
28070340494 10000198352 2.80697837242
elapsed ns: 50001225563, elapsed ticks: 140352454025, ns_diff: -50742
tsc ticks ns tsc ticks per ns
28070325598 10000196057 2.80697752704
elapsed ns: 60001465937, elapsed ticks: 168422905017, ns_diff: -70335
^C
The viewRates
output shows that the TSC ticks per ns are decreasing fairly rapidly with time corresponding to one of those steep drops in the plot above. The linearExtrapolator
output shows, as in the OP, the difference between the elapsed ns as reported by clock_gettime()
, and the elapsed ns obtained by converting the elapsed TSC ticks to elapsed ns using _ticks_per_ns
== 2.8069831264 obtained at start time. Rather than a sleep(10);
between each print out of elapsed ns
, elapsed ticks
, ns_diff
, I re-run the TSC ticks per ns calculation using a 10s window; this prints out the current tsc ticks per ns
ratio. It can be seen that the trend of decreasing TSC ticks per ns observed from the viewRates
output is continuing throughout the run of linearExtrapolator
.
Dividing an elapsed ticks
by _ticks_per_ns
and subtracting the corresponding elapsed ns
gives the ns_diff
, e.g.: (84211534141 / 2.8069831264) - 30000747550 = -20667. But this is not 0 mainly due the drift in TSC ticks per ns. If we had used a value of 2.80698015186 ticks per ns obtained from the last 10s interval, the result would be: (84211534141 / 2.80698015186) - 30000747550 = 11125. The additional error accumulated during that last 10s interval, -20667 - -10419 = -10248, nearly disappears when the correct TSC ticks per ns value is used for that interval: (84211534141 - 56141027929) / 2.80698015186 - (30000747550 - 20000496849) = 349.
If the linearExtrapolator had been run at a time when the TSC ticks per ns had been constant, the accuracy would be limited by how well the (constant) _ticks_per_ns
had been determined, and then it would pay to take, e.g., a median of several estimates. If the _ticks_per_ns
was off by a fixed 40 parts per billion, a constant drift of about 400ns every 10 seconds would be expected, so ns_diff
would grow/shrink by 400 each 10 seconds.
genTimeSeriesofRates.cc can be used to generate data for a plot like above: genTimeSeriesofRates.cc:
#include
#include
#include
#include
#include
#include
#include "rdtscp.h"
using std::cout; using std::cerr; using std::endl; using std::array;
double get_ticks_per_ns(long &ticks, long &ns); // Get median tsc ticks per ns, ticks and ns.
long ts_to_ns(const timespec &ts);
#define CLOCK CLOCK_REALTIME // clock_gettime() clock to use.
#define TIMESTEP 10
#define NSTEPS 10000
#define RUNS 5 // Number of RUNS and SLEEP interval used for each sample in get_ticks_per_ns().
#define SLEEP 1
int main() {
timespec ts;
clock_getres(CLOCK, &ts);
cerr << "CLOCK resolution: " << ts_to_ns(ts) << "ns\n";
clock_gettime(CLOCK, &ts);
int start_time = ts.tv_sec;
double ticks_per_ns;
int running_elapsed_time = 0; //approx secs since start_time to center of the sampling done by get_ticks_per_ns()
long ticks, ns;
for (int timestep = 0; timestep < NSTEPS; ++timestep) {
clock_gettime(CLOCK, &ts);
ticks_per_ns = get_ticks_per_ns(ticks, ns);
running_elapsed_time = ts.tv_sec - start_time + RUNS * SLEEP / 2;
cout << running_elapsed_time << ' ' << ticks << ' ' << ns << ' '
<< std::setprecision(12) << ticks_per_ns << endl;
sleep(10);
}
}
double get_ticks_per_ns(long &ticks, long &ns) {
// get the median over RUNS runs of elapsed tsc ticks, CLOCK ns, and their ratio over a SLEEP secs time interval
timespec clock_start, clock_end;
long tsc_start, tsc_end;
array elapsed_ns, elapsed_ticks;
array rates; // arrays from each run from which to get medians.
for (int i = 0; i < RUNS; ++i) {
clock_gettime(CLOCK, &clock_start);
tsc_start = rdtscp_end(); // minimizes time between clock_start and tsc_start.
sleep(SLEEP);
clock_gettime(CLOCK, &clock_end);
tsc_end = rdtscp_end();
elapsed_ticks[i] = tsc_end - tsc_start;
elapsed_ns[i] = ts_to_ns(clock_end) - ts_to_ns(clock_start);
rates[i] = static_cast(elapsed_ticks[i]) / elapsed_ns[i];
}
// get medians:
std::nth_element(elapsed_ns.begin(), elapsed_ns.begin() + RUNS/2, elapsed_ns.end());
std::nth_element(elapsed_ticks.begin(), elapsed_ticks.begin() + RUNS/2, elapsed_ticks.end());
std::nth_element(rates.begin(), rates.begin() + RUNS/2, rates.end());
ticks = elapsed_ticks[RUNS/2];
ns = elapsed_ns[RUNS/2];
return rates[RUNS/2];
}
constexpr long BILLION {1000000000};
long ts_to_ns(const timespec &ts) {
return ts.tv_sec * BILLION + ts.tv_nsec;
}